Revisiting Stainless-Steel Nail Calculations . . . .

This week’s post was written by Bob Leichti, Manager of Engineering for Fastening Systems.

Those of you who have been following the Simpson Strong-Tie SE Blog for a while may recall our 2013 blog post on the withdrawal resistance of stainless-steel nails. There have been several developments relating to that subject since that blog was posted, and we want to help you catch up.

First, the National Design Specification for Wood Construction (NDS) was revised in 2015. In the 2015-NDS revision, a new chapter 10, Cross-Laminated Timber, was created,, moving Dowel-Type Fasteners from Chapter 11 to Chapter 12. Every place in the original blog post where there is a snip of the NDS, you will find the same information in NDS-2015 Chapter 12. Did you know that you can download a free, view-only copy of the NDS from the American Wood Council at

Second, after we published our blog post about stainless-steel nail withdrawal, a journal paper was published about withdrawal resistance of stainless-steel nails. This paper has all the nitty-gritty related to withdrawal resistance and bending yield strength for smooth-shank stainless-steel nails: Ramer, D.R. and Zelinka, S.L. (2015). “Withdrawal Strength and Bending Yield Strength of Stainless Steel Nails,” Journal of Structural Engineering, American Society of Civil Engineers, Vol. 141, no. 5, 7 pp. (DOI: 10:1061/ASCE)ST.1943-541X.0001088).

Third, the NDS has been through another revision cycle and will soon have a 2018 copyright date. The chapter on dowel-type fasteners has some significant revisions that we will discuss in a blog post when the NDS-2018 is published later this year. SPOILER ALERT: NDS-2018 has a new withdrawal function for smooth-shank stainless steel nails.

Stay tuned!