Decks Done Right Series — Real Solutions for Safer, Stronger Decks: Joists, Joist Connections, Beams, and Lateral Requirements

Deck Beams and Joists

Deck beams and joists need to be sized, spaced, and supported properly to support the loads that they are subjected to. The tables in 2021 IRC R507.5 list maximum beam spans for the different wood species members based on various ground snow loads. Table R507.6 helps to determine the maximum joist span, considering live load, wood species, joist spacing, joist size, and whether there’s a cantilever or not. Cantilevers are included but are maxed out at L/4. Joist spacing should be no more than 16″ o/c for decking that runs perpendicular to joists and no more than 12″ o.c. if the decking runs diagonal to them. DCA 6, Table 2 is the comparable section that addresses maximum joist spans and overhangs. These member sizes and spans are developed using established code minimum distributed loads of 40 psf live and 10 psf dead.

Continue Reading

Decks Done Right Series — Real Solutions for Safer, Stronger Decks

The ledger is a crucial component in deck construction, serving as the wood member that attaches the entire deck to the house. Its proper installation is vital, as an improperly installed ledger is one of the most common causes of deck failure. This failure can result from inadequate or improper fastening to the supporting structure or from a failure to correctly flash the installation to prevent rot. Both issues can worsen over time, seriously compromising the integrity of a deck.

Continue Reading

The Decks Are NOT Stacked Against Us: How SB721 and SB326 Can Help Californians Reinforce Structures and Save Lives

Learn how a tragic balcony collapse in Berkeley, California, led to the development of Senate Bills 721 and 326, which mandate the inspection of exterior elevated elements (EEEs) in multifamily buildings. These bills aim to improve safety by evaluating EEEs such as balconies, decks, and walkways, particularly those relying on wood-based products for support. Recognize the significance of these inspections and the repairs needed to safeguard residents.

Continue Reading