Why Fire-Rated Hangers Are Required in Type III Wood-Frame Buildings

One of the first mixed-use designs I worked on as a consulting structural engineer was a four-story wood-frame building over two levels of parking. Designing the main lateral-force-resisting system with plywood shearwalls was a challenge for this project that required new details to meet the high design loads. The high overturning forces were resisted using the Simpson Strong-Tie® Strong-Rod™ anchor tiedown system, which incorporates high-strength rods, bearing plates and shrinkage compensation devices.
Continue Reading

Do 50 Kip Wood Construction Connectors Exist?

The 2009 IBC Section 1604.4 states, “Load effects on structural members and their connections shall be determined by methods of structural analysis that take into account equilibrium, general stability, geometric compatibility and both short and long-term material properties.” This requirement applies to a 200 pound handrail connection as well as a 50,000 pound glulam connection.

Hanger installation at jobsite

50 kips is not a typical beam reaction in wood framed construction, but we’ve received some recent requests to design higher capacity hangers for use in wood podium decks for mixed-use structures. Although post-tensioned concrete is most commonly used for this application, the use of heavy timber for podium decks is driven by the benefits of wood: sustainability, saving construction time and money, architecturally attractive, long-term energy savings, light construction material, and performance in earthquakes.

Continue Reading