Simpson Strong-Tie is sponsoring the 24th Short Course on Cold-Formed Steel Structures hosted by the Wei-Wen Yu Center for Cold-Formed Steel Structures (CCFSS). The course will be held on October 27-29, 2015 at the Drury Plaza Hotel at the Arch in St. Louis, MO.
This three-day course is for engineers who have limited or no experience designing with cold-formed steel (CFS), as well as those with experience who would like to expand their knowledge of cold-formed steel structural design. Lectures will be given by industry-recognized experts Roger LaBoube, Ph.D., P.E., and Sutton Stephens, Ph.D., P.E., S.E. The course is based on the 2012 AISI North American Specification for the Design of Cold-Formed Steel Structural Members and the 2012 North American Standards for Cold-Formed Steel Framing. Dr. Wei-Wen Yu’s book Cold-Formed Steel Design (4th Edition) will be a reference text.
The course will address such topics as design of wall studs, floor joists, purlins, girts, decks and panels. It is eligible for 2.4 Continuing Education Units (CEUs). Advance registration is requested by October 10, 2015. For more information and to register, click here.
Author: Jeff Ellis
I’m a licensed Civil and Structural Engineer in California, Hawaii and Illinois and have been a practicing engineer since 1991. Prior to coming to Simpson Strong-Tie in 2000, I was a design engineer for small and large commercial, institutional, residential and forensic projects designing with wood, cold-formed steel, structural steel, masonry and concrete for more than nine years. I began working at Simpson Strong-Tie as a branch engineer for the southwest regional offices. Later, I served as a senior engineering project manager, and then in a dual role as code-report manager for the company and branch engineering manager for the southwest regional offices. Currently I’m the Director of Codes & Compliance and manage Simpson Strong-Tie’s evaluation (code) reports and our participation in the codes, standards and technical groups, as well as working on special projects such as product and system development and enhancement. I’ve had the honor and good fortune to participate in several industry organizations over the years, such as a board director and president of the Structural Engineers Association of Southern California (SEAOSC), SEAOC Secretary, a California Building Officials (CALBO) Structural Safety Committee member, and a member of the International Code Council Evaluation Service (ICC-ES) Board of Managers. Also I’ve served as chairman of the AISI Committee on Framing Standards (COFS) Lateral Design Subcommittee for several years and as president of the Cold-Formed Steel Engineers Institute (CFSEI). In addition, I was the primary author of the CFSEI “Cold-Formed Steel Framed Wood Panel or Steel Sheet Sheathed Shear Wall Assemblies Design Guide.” I’ve truly been blessed to work with so many talented, dedicated and passionate folks here at Simpson Strong-Tie, as well as within the larger industry. View all posts by Jeff Ellis
