In 2021 SImpson Strong-Tie hosted a “Building Connections” symposium at Washington State University. The well-attended event provided our team the opportunity to teach WSU engineering students about the construction industry, common construction methods, our products and our company. Ryan Edwards, Simpson Strong-Tie Senior Business Specialist for Mass Timber and Offsite Construction, co-hosted the symposium and in this blog post reflects on the experience.
Our “Quik” line of tools now has jobsite efficiency covered from subfloor to drywall to rafters. The Quik Stik overhead assembly fastening system is our most recent innovation in a line of fastening systems that also includes the Quik Drive® PRO250G3 subfloor system and the Quik Drive PRODW drywall system. It provides contractors with a versatile solution that makes fastening rafter and truss connections faster and easier than ever. Here are five ways the Quik Stik raises the bar on overhead fastening.
My wife, Kristin, sometimes gets angry with me while grocery shopping. It’s understandable. She’s asked me to grab some tomatoes or a loaf of bread and instead I’m just standing there looking up at the ceiling. Technically, it’s not a ceiling, but the underside of the roof, and I’m looking up to see the connection detailing, including whether or not the steel roof deck I’m looking at was welded, pinned, or screwed down to the steel joist, beam and angle supports.
If you’re a structural engineer, you might also do this inside your local supermarket, Target, Walmart or The Home Depot. Many of these “big box” stores are typically constructed of tilt-up concrete perimeter walls, tube steel interior columns, and roofs built of steel joists, girders and decking. Though Simpson Strong-Tie is well known in the light-frame wood construction industry, some may not know that we’ve long been developing and selling anchors and fasteners for commercial construction.
Outside of a few dips into a Verco or ASC steel decking catalog from my consulting days in Las Vegas, my first real foray into the steel decking industry was about two years ago. I was asked to assist in representing Simpson Strong-Tie as an associate member at the Steel Deck Institute’s (SDI) quarterly meeting held just down the road in Dallas in November 2011. Since joining SDI, my main focus has been to find out what the industry needs, both from the installer’s and designer’s standpoint for steel deck attachment. Though we’ve had a screw attachment offering for years, my colleagues and I have worked to develop a better overall system which now includes: